AUTOS & BOATS Index
Auto Restoration & Kit Cars
Air Conditioning
Automotive Body Work
Automotive Cooling System
Electrical Systems
Exhaust System
Fuel Systems
Boats
Brakes
Buying
Detailing
Engine
Exterior
Interior
Parts & Accessories
Safety
Security
Small Engines
Stereo
Suspension
Tires
Tools
Trailers
Transmission
Vehicle Types
Windows

Best of Autos Boats
Classic Car Restoration
Preventive Maintenance
Ultimate Car-Care Guide

SPONSOR LINKS

  • Steel Trailer Bed
  • A steel trailer bed is fabricated.
    From "Trade School"
    episode DTRS-313


    Apprentice Noah Gunn tests his mettle by fabricating a steel trailer bed with the help of his mentor Marty Weis.

    advertisement


    Materials:

    chop saw
    disc grinder
    clamps
    MIG welder
    chalk line
    jigsaw
    fiberglass resin and catalyst
    fiberglass matte fabric
    fiberglass roller
    paintbrush
    DA sander
    HV-LP paint sprayer
    table saw
    orbital sander
    power drill
    edge router
    staple gun
    hole-saw drill

    1. Instead of starting totally from scratch, Noah measures the individual pieces from a previously fabricated trailer (figure A). Using a chop saw, he cuts square steel tubing and segments of angle iron to size (figure B). To remove sharp burns from the cut steel, Noah grinds off the ends using a disc grinder (figure C).
    Photo

    Figure A

    Photo

    Figure B

    Photo

    Figure C


    2. Noah aligns and clamps the perimeter tubing pieces together on a steel table. Using a MIG welder, Noah tack-welds the pieces together (figure D). Critical to the performance of the trailer, he determines if the perimeter is square by taking a cross measurement (figure E).

    3. He now marks along the perimeter, and then welds in with the cut segments of the angle iron (figure F). These serve as the cross members that support the main section of the trailer.
    Photo

    Figure D

    Photo

    Figure E

    Photo

    Figure F


    4. To create and attach a perfectly centered tongue and hitch, Noah first snaps a chalk line down the center of the trailer bed (figure G). Measuring from this line, he aligns and clamps the tongue members and hitch in place. After tack-welding the members, he goes back and seam-welds all of the joints of the trailer bed (figure H).
    Photo

    Figure G

    Photo

    Figure H


    5. Noah cross-measures, centers and welds on a wheel axle bracket made of thick angle iron pieces (figure I).

    6. Before mounting the wheels and fiberglass living space, Noah makes sure to weld several additional pieces including mounting brackets, and a stabilizing jack stand.

    7. Noah cleans up the areas that have been welded using a disc grinder (figure J).
    Photo

    Figure I

    Photo

    Figure J


    In the next segment, Noah continues his education by customizing the fiberglass living space of the trailer.

  • ALSO IN THIS EPISODE: